PrimeStick-WEP
Two Component Water Dispersed Epoxy Primer
hahne PrimeStick-WEP is a two-component, water-dispersed epoxy resin primer designed as a primer and adhesion promoter for properly prepared concrete, cementitious screeds and suitable metal surfaces. The water-dispersed formulation is low odour and suitable for use in areas where solvent-based primers are undesirable. It provides strong adhesion and is particularly suitable for highly absorbent substrates.
Features and Benefits
- Two-component water-dispersed epoxy primer.
- Low odour formulation suitable for enclosed and unventilated areas with appropriate ventilation.
- Excellent adhesion to properly prepared mineral substrates.
- Particularly suitable for highly absorbent concrete and cementitious substrates.
- Helps seal substrate porosity and promotes uniform adhesion of subsequent coatings.
Consumption
Approx. 0.2–0.25 kg/m²
Coverage may vary depending on surface condition, temperature, applicator skill, surface porosity and substrate quality.
Area of Applications
- Primer and adhesion promoter for new / green concrete.
- Primer for old and existing concrete surfaces.
- Priming of cementitious screeds.
- Priming of suitably prepared metal surfaces.
- Primer beneath compatible waterproofing, protective and flooring systems.
| Technical Specification | Result |
|---|---|
| Density | 1 – 1.1 g/cc |
| Test Method | ASTM D 1475-2013 |
| Non-Volatile Content (Solid Content) | 55 ± 5 % |
| Test Method | ASTM D 1644-2001 |
| Pot Life | 2 hr |
| Pull-Off Adhesion | > 2 N/m² |
| Consumption | Approx. 0.2–0.25 kg/m² |
The TDS identifies the density, non-volatile content, pot life and pull-off adhesion in its technical specifications table.