Surface Coatings
LF41 12E
LF41 12E
Osmosis-Resistant, Vapour Diffusion Permeable Top Coating
A protective surface coating designed to resist osmotic blistering while allowing controlled vapour diffusion through the coating layer. It provides durable protection to mineral substrates and is suitable for concrete surfaces exposed to moisture conditions.
Features and Benefits
- Solvent-free, pigmented, 2-component epoxy resin dispersion
- Suitable for a wide range of flooring applications
- Commercial and decorative floors
- Both new construction and refurbishment projects
- Provides maximum coverage for efficient floor finishing.
Area of Applications
For coating mineral substrates, floors and wall surfaces
Operational area
- Concrete, screed, cement plaster, masonry, fiber cement
- Coating of wall and floor surfaces in workrooms, warehouses, garages and cellars
Place of use
- For interior and exterior use
Properties
- Solvent-free
- Breathable
- Mechanically and chemically resilient
- Slip-resistant
- Fillable
- VOC-free
Technical Specifications
| Available container sizes |
20 kg/set 5 kg/combination container |
|---|---|
| Colour | Stone gray approx. RAL 7030 |
| Mixing ratio | 4 : 1 parts by weight |
| Density, ready to use | Approx. 1.35 kg/l |
| Abrasion loss (according to Taber) | 0.058 g (roll CS 10, 1000 U, 1000 g) |
| Adhesive strength | ≥ 1.5 MPa |
| Processing temperature | +10°C to +30°C |
| Processing time | Approx. 45 minutes |
| Walkability | After approx. 6 hours ¹) |
| Resilience | Fully loadable after approx. 5 days ¹) |
| Storage | Frost-free, 12 months |
| Consumption | Approx. 0.25 kg/m² per coat |
¹) At +20 °C and 60 % relative humidity