• hahne TA300 should be applied after proper surface preparation.
• Apply using a flat trowel to achieve required bed thickness with uniformity and level it using a notched trowel of suitable thickness. The thickness of the ribs will depend on the size of the tile and bed thickness.
• Apply only as much adhesive as can be installed within the specified open time and tile adjustment time to ensure optimal bonding and performance.
• Fix the tiles immediately with a sliding motion to get a high bonding quality. It is always recommended to use spacers for proper alignment.
• Correct the position of the tile before the adjusting time of the mortar; otherwise, it will affect bond strength.
• After fixing the tiles, remove the excess mortar with a damp cloth before the material sets. It is also recommended to clean joints properly for further grouting.

Precautions and Limitations

• Avoid applying the adhesive on wet substrates, as it may affect the bonding quality.
• It is also unsuitable for areas that are subject to continuous water immersion.
• During curing, protect the applied adhesive from rain and frost to ensure it cures properly