Application

• Regulates absorption behavior of mineral substrates for consistent performance.
• Improves the adhesive bond for better durability and long-lasting results.
• Works effectively on both absorbent and non-absorbent surfaces.
• Suitable for use on both wall and floor areas, offering versatile application.
• Designed for both indoor and outdoor use, ensuring reliable adhesion in various environments.

Substrate Preparation:

• Ensure the surface is dry, level, clean, stable, and absorbent
• Remove any adhesion-reducing residues, efflorescence, or sintered layers
• For optimal results, ensure the surface is free from contaminants

Mixing & Preparation:

• Shake the product well before use
• For cementitious substrates, dilute with clean water in a 1:1 to 1:3 ratio
• For calcium sulphate screeds, dry screeds, plasterboard, and gypsum fibreboard, use undiluted
• Highly absorbent surfaces may require a second "fresh-on-fresh" coat for better coverage

Application:

• Apply evenly using a roller, brush, or sprayer
• Avoid puddling to ensure an even coat
• Ensure full and consistent coverage for optimal adhesion

Drying & Hardening:

• Drying time is typically between 15 to 30 minutes, depending on environmental conditions
• Drying time is affected by temperature, humidity, and substrate absorbency
• Low temperature and high humidity can delay drying, while high temperature and low humidity can speed it up
• Apply subsequent coatings only when the surface is fully dry
• Timings are based on conditions of +20°C and 65% relative humidity

Technical Data