Application

• Ideal for weakly or non-absorbent ceramic surfaces (stoneware, fine stoneware, split tiles, clinker slabs, artificial stone, natural stone, glass, mosaic).
• Perfect for narrow joints in large-format slabs.
• Compatible with wall, floor, and electrical surface heating.
• Suitable for areas with high thermal loads (balconies, loggias, terraces).
• For both interior and exterior applications.

Mixing / Preparation / Processing

• Pour the specified amount of clean tap water into a container.
• Gradually add dry mortar while mixing with a suitable agitator until smooth.
• Let it rest, then mix again.
• Use a consistent water ratio to prevent color variations.
• Do not mix with other products or substances.

Applying

• Spread the grout diagonally over joints using a rubber or foam rubber board.
• If needed, reapply wet-in-wet.
• Once mortar tightens (finger test), wipe excess with a damp sponge diagonally.
• After drying, remove residual film with a damp sponge.

Processing Time

• Workable for approx. 60 minutes at +20°C and 65% humidity.
• Do not add water or remix once the mortar starts to harden.

Drying / Hardening

• Protect fresh mortar from rapid drying, frost, draughts, direct sunlight, and heavy rain using foil if necessary.

Technical Data